Spraypaint on taskboard pro#

You may apply one or two coats of primer, depending on your preference. When applying, keep in mind to use personal protective equipment such as a face mask, gloves, and goggles to avoid self-adhering damage. To cover the entire surface of the skateboard, use a small roller or a brush. It’s critical to cover all areas evenly with the primer.įollow the instructions for the primer you’ve chosen carefully. It will keep dirt and water out, preventing scratches and warps. A primer will provide a second layer of protection for your deck. Step 6: Add One Or Two Coats Of PrimerĪpply your primer to the deck of your skateboard. It can cause dents and can potentially cause other damage and uneven paint in the next steps.

Spraypaint on taskboard pro#

Pro Tip: When sanding, avoid applying uneven pressure. Make sure you smooth the surface equally and apply equal pressure on all sections. Sand down the repaired areas using 150 grit sandpaper. Allow each layer of filler to completely dry before sanding it down. If you fill the surface with dots of filler, it will not look good on your repainting project. It’s also critical to evenly apply the filler in order to avoid an uneven surface. Filling in the cracks will make your skateboard much more durable. To ensure that it is fully repaired and no dirt or water can get in, apply a thick layer of this filling. To repair the cracks and chips on your skateboard, you may purchase wood filler paste. This will not only extend the life of your skateboard but also enhance its texture and longevity. It’s best to fix any issues first than having to restore it after it has been repainted. If you notice any damage, it is critical to repair them before painting. Step 4: Repair Any Wood Damage (If There Is Any) If you don’t get rid of every little thing, the particles might clump together and cause uneven tones when you re-paint the deck. The easiest approach to clean your skateboard is to use a stiff bristle brush. When you’re finished sanding, ensure to clean up all of the sawdust in the immediate area. This will prevent inhaling particles of wood or irritating your eyes. Remember to wear the appropriate protective gear such as a painter’s mask and eye goggles. Then follow with 120 or 220 grit sandpaper to even out the surface. If you’re using an electric sander, use 40 grit paper. You can use a lower grit sandpaper to start, and them work to a higher number to get a smoother surface. Step 3: Sand The Deckīefore you paint the skateboard, sand down the old design. Soak them in bearing cleaner and then lube them before putting them back in the wheels and on the newly painted skateboard. While you’re at it, you could also remove the bearings from the wheels. This step will make it easier, faster, and create less stress. This is important so that you can thoroughly paint the deck without getting any paint on the other components. Also, make sure to wear a painter’s mask so that you’re not inhaling the fumes. Even opening a window and turning on a fan will help. Wearing something you don’t mind getting dirty throughout the process is even better.Ī ventilated area is a must if you’re using aerosols. Wear something old, tattered, or scruffy paint splatters will give it character. It is also critical to wear suitable clothing. You’ll want to tape down garbage bags so that you don’t get paint on anything important.

Set up an area in your home or in the backyard, if weather permits.

Stencil (if you plan on using one) Step 1: Set Up Your Area.

Spray paint or acrylic paint and a paint brush.

Sandpaper (120 to 220 grit works best).

11 Conclusion What You Need To Repaint A Skateboard: